1962 Abarth 600 vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Abarth 600. In addition, the cost of maintenance, including insurance, on 1962 Abarth 600 would be higher. At 3,600 cc (6 cylinders), 2013 Chrysler 200 CONVERTIBLE is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 220 more horse power than 1962 Abarth 600. (59 HP @ 6200 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1962 Abarth 600. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 1039 kg more than 1962 Abarth 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Abarth 600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Abarth 600. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 261 more torque (in Nm) than 1962 Abarth 600. (92 Nm @ 3000 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1962 Abarth 600. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1962 Abarth 600 has manual transmission. 1962 Abarth 600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Abarth 600 | 2013 Chrysler 200 CONVERTIBLE | |
| Make | Abarth | Chrysler |
| Model | 600 | 200 CONVERTIBLE |
| Year Released | 1962 | 2013 |
| Engine Position | Rear | Front |
| Engine Size | 980 cc | 3600 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 59 HP | 279 HP |
| Engine RPM | 6200 RPM | 6400 RPM |
| Torque | 92 Nm | 353 Nm |
| Torque RPM | 3000 RPM | 4400 RPM |
| Engine Bore Size | 65 mm | 96 mm |
| Engine Stroke Size | 74 mm | 83 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 583 kg | 1622 kg |
| Vehicle Length | 3300 mm | 4870 mm |
| Vehicle Width | 1390 mm | 2121 mm |
| Vehicle Height | 1410 mm | 1482 mm |
| Wheelbase Size | 2010 mm | 2765 mm |
| Fuel Tank Capacity | 60 L | 64 L |
