1962 Abarth 750 vs. 2008 Peugeot 1007

To start off, 2008 Peugeot 1007 is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Abarth 750. In addition, the cost of maintenance, including insurance, on 1962 Abarth 750 would be higher. At 1,360 cc (4 cylinders), 2008 Peugeot 1007 is equipped with a bigger engine. In terms of performance, 2008 Peugeot 1007 (72 HP) has 29 more horse power than 1962 Abarth 750. (43 HP) In normal driving conditions, 2008 Peugeot 1007 should accelerate faster than 1962 Abarth 750. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 1007 weights approximately 680 kg more than 1962 Abarth 750. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Abarth 750 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Abarth 750. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 1007 (118 Nm @ 3300 RPM) has 61 more torque (in Nm) than 1962 Abarth 750. (57 Nm @ 4500 RPM). This means 2008 Peugeot 1007 will have an easier job in driving up hills or pulling heavy equipment than 1962 Abarth 750. 2008 Peugeot 1007 has automatic transmission and 1962 Abarth 750 has manual transmission. 1962 Abarth 750 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Peugeot 1007 will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Abarth 750 2008 Peugeot 1007
Make Abarth Peugeot
Model 750 1007
Year Released 1962 2008
Engine Position Rear Front
Engine Size 747 cc 1360 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 43 HP 72 HP
Torque 57 Nm 118 Nm
Torque RPM 4500 RPM 3300 RPM
Engine Bore Size 61 mm 75 mm
Engine Stroke Size 64 mm 77 mm
Engine Compression Ratio 8.5:1 10.5:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 535 kg 1215 kg
Vehicle Length 3300 mm 3740 mm
Vehicle Width 1390 mm 1670 mm
Vehicle Height 1410 mm 1630 mm
Wheelbase Size 2010 mm 2320 mm
Fuel Tank Capacity 27 L 40 L