1962 AC Aceca vs. 2008 Fiat Palio
To start off, 2008 Fiat Palio is newer by 46 year(s). Which means there will be less support and parts availability for 1962 AC Aceca. In addition, the cost of maintenance, including insurance, on 1962 AC Aceca would be higher. At 2,553 cc (6 cylinders), 1962 AC Aceca is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Palio weights approximately 204 kg more than 1962 AC Aceca.
Because 1962 AC Aceca is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 AC Aceca. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 AC Aceca (209 Nm @ 4500 RPM) has 107 more torque (in Nm) than 2008 Fiat Palio. (102 Nm @ 3250 RPM). This means 1962 AC Aceca will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Palio.
Compare all specifications:
1962 AC Aceca | 2008 Fiat Palio | |
Make | AC | Fiat |
Model | Aceca | Palio |
Year Released | 1962 | 2008 |
Engine Position | Front | Front |
Engine Size | 2553 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 168 HP | 0 HP |
Torque | 209 Nm | 102 Nm |
Torque RPM | 4500 RPM | 3250 RPM |
Engine Compression Ratio | 9.5:1 | 9.1:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 2 seats | 2 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 791 kg | 995 kg |
Vehicle Length | 4070 mm | 3830 mm |
Vehicle Width | 1560 mm | 1640 mm |
Vehicle Height | 1330 mm | 1440 mm |
Wheelbase Size | 2290 mm | 2380 mm |
Fuel Tank Capacity | 54 L | 54 L |