1962 Alfa Romeo 2600 vs. 1980 Lancia Beta
To start off, 1980 Lancia Beta is newer by 18 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1962 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1962 Alfa Romeo 2600 (163 HP @ 5900 RPM) has 62 more horse power than 1980 Lancia Beta. (101 HP @ 5800 RPM). In normal driving conditions, 1962 Alfa Romeo 2600 should accelerate faster than 1980 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1962 Alfa Romeo 2600 weights approximately 79 kg more than 1980 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Alfa Romeo 2600 (220 Nm @ 4000 RPM) has 86 more torque (in Nm) than 1980 Lancia Beta. (134 Nm @ 3000 RPM). This means 1962 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Beta. 1980 Lancia Beta has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Lancia Beta will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Alfa Romeo 2600 | 1980 Lancia Beta | |
| Make | Alfa Romeo | Lancia |
| Model | 2600 | Beta |
| Year Released | 1962 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 1585 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 163 HP | 101 HP |
| Engine RPM | 5900 RPM | 5800 RPM |
| Torque | 220 Nm | 134 Nm |
| Torque RPM | 4000 RPM | 3000 RPM |
| Engine Bore Size | 83 mm | 84 mm |
| Engine Stroke Size | 79.6 mm | 71.5 mm |
| Engine Compression Ratio | 8.3:1 | 9.4:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 1115 kg | 1036 kg |
| Vehicle Length | 4410 mm | 4290 mm |
| Vehicle Width | 1660 mm | 1660 mm |
| Vehicle Height | 1330 mm | 1330 mm |
| Wheelbase Size | 2510 mm | 2550 mm |
| Fuel Tank Capacity | 47 L | 59 L |
