1962 Alfa Romeo 2600 vs. 2007 Peugeot 1007
To start off, 2007 Peugeot 1007 is newer by 45 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 2,583 cc (6 cylinders), 1962 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1962 Alfa Romeo 2600 (163 HP @ 5900 RPM) has 55 more horse power than 2007 Peugeot 1007. (108 HP @ 5750 RPM). In normal driving conditions, 1962 Alfa Romeo 2600 should accelerate faster than 2007 Peugeot 1007. With that said, vehicle weight also plays an important factor in acceleration. 1962 Alfa Romeo 2600 weights approximately 79 kg more than 2007 Peugeot 1007. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2007 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Alfa Romeo 2600 (220 Nm @ 4000 RPM) has 73 more torque (in Nm) than 2007 Peugeot 1007. (147 Nm @ 4000 RPM). This means 1962 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 2007 Peugeot 1007. 2007 Peugeot 1007 has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Peugeot 1007 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Alfa Romeo 2600 | 2007 Peugeot 1007 | |
| Make | Alfa Romeo | Peugeot |
| Model | 2600 | 1007 |
| Year Released | 1962 | 2007 |
| Engine Position | Front | Front |
| Engine Size | 2583 cc | 1587 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 163 HP | 108 HP |
| Engine RPM | 5900 RPM | 5750 RPM |
| Torque | 220 Nm | 147 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Engine Bore Size | 83 mm | 78.5 mm |
| Engine Stroke Size | 79.6 mm | 82 mm |
| Engine Compression Ratio | 9.0:1 | 11.0:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 193 km/hour | 190 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 1370 kg | 1291 kg |
| Vehicle Length | 4590 mm | 3740 mm |
| Vehicle Width | 1710 mm | 1670 mm |
| Vehicle Height | 1330 mm | 1630 mm |
| Wheelbase Size | 2510 mm | 2320 mm |
| Fuel Tank Capacity | 60 L | 40 L |
