1962 Alfa Romeo 2600 vs. 2008 Chrysler Grand Voyager
To start off, 2008 Chrysler Grand Voyager is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 3,301 cc (6 cylinders), 2008 Chrysler Grand Voyager is equipped with a bigger engine. In terms of performance, 2008 Chrysler Grand Voyager (175 HP @ 5100 RPM) has 12 more horse power than 1962 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2008 Chrysler Grand Voyager should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Grand Voyager weights approximately 795 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Chrysler Grand Voyager is four wheel drive (4WD), it will have significant more traction and grip than 1962 Alfa Romeo 2600. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Grand Voyager will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Grand Voyager (278 Nm @ 4000 RPM) has 58 more torque (in Nm) than 1962 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2008 Chrysler Grand Voyager will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2008 Chrysler Grand Voyager has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Grand Voyager will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Alfa Romeo 2600 | 2008 Chrysler Grand Voyager | |
| Make | Alfa Romeo | Chrysler |
| Model | 2600 | Grand Voyager |
| Year Released | 1962 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2583 cc | 3301 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 163 HP | 175 HP |
| Engine RPM | 5900 RPM | 5100 RPM |
| Torque | 220 Nm | 278 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Engine Bore Size | 83 mm | 93 mm |
| Engine Stroke Size | 79.6 mm | 81 mm |
| Engine Compression Ratio | 9.0:1 | 8.9:1 |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 193 km/hour | 179 km/hour |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 6 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1370 kg | 2165 kg |
| Vehicle Length | 4590 mm | 4930 mm |
| Vehicle Width | 1710 mm | 2000 mm |
| Vehicle Height | 1330 mm | 1760 mm |
| Wheelbase Size | 2510 mm | 3040 mm |
| Fuel Tank Capacity | 60 L | 75 L |
