1962 Alfa Romeo 2600 vs. 2009 Peugeot 607
To start off, 2009 Peugeot 607 is newer by 47 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 2,946 cc (6 cylinders), 2009 Peugeot 607 is equipped with a bigger engine. In terms of performance, 2009 Peugeot 607 (208 HP @ 3750 RPM) has 45 more horse power than 1962 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2009 Peugeot 607 should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2009 Peugeot 607 weights approximately 520 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2009 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Peugeot 607 (294 Nm @ 3750 RPM) has 74 more torque (in Nm) than 1962 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2009 Peugeot 607 will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2009 Peugeot 607 has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Peugeot 607 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Alfa Romeo 2600 | 2009 Peugeot 607 | |
| Make | Alfa Romeo | Peugeot |
| Model | 2600 | 607 |
| Year Released | 1962 | 2009 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 2946 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 163 HP | 208 HP |
| Engine RPM | 5900 RPM | 3750 RPM |
| Torque | 220 Nm | 294 Nm |
| Torque RPM | 4000 RPM | 3750 RPM |
| Engine Bore Size | 83 mm | 87 mm |
| Engine Stroke Size | 79.6 mm | 82.6 mm |
| Engine Compression Ratio | 8.3:1 | 10.9:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1115 kg | 1635 kg |
| Vehicle Length | 4410 mm | 4880 mm |
| Vehicle Width | 1660 mm | 1830 mm |
| Vehicle Height | 1330 mm | 1470 mm |
| Wheelbase Size | 2510 mm | 2810 mm |
| Fuel Tank Capacity | 47 L | 80 L |
