1962 Alfa Romeo 2600 vs. 2010 Chevrolet Traverse
To start off, 2010 Chevrolet Traverse is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 3,600 cc (6 cylinders), 2010 Chevrolet Traverse is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Traverse (288 HP @ 6300 RPM) has 145 more horse power than 1962 Alfa Romeo 2600. (143 HP @ 5900 RPM) In normal driving conditions, 2010 Chevrolet Traverse should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Traverse weights approximately 953 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Traverse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Traverse (366 Nm @ 3400 RPM) has 149 more torque (in Nm) than 1962 Alfa Romeo 2600. (217 Nm @ 4000 RPM). This means 2010 Chevrolet Traverse will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2010 Chevrolet Traverse has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Traverse will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Alfa Romeo 2600 | 2010 Chevrolet Traverse | |
Make | Alfa Romeo | Chevrolet |
Model | 2600 | Traverse |
Year Released | 1962 | 2010 |
Body Type | Convertible | Crossover |
Engine Position | Front | Front |
Engine Size | 2584 cc | 3600 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 143 HP | 288 HP |
Engine RPM | 5900 RPM | 6300 RPM |
Torque | 217 Nm | 366 Nm |
Torque RPM | 4000 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1220 kg | 2173 kg |
Vehicle Length | 4500 mm | 5207 mm |
Vehicle Width | 1680 mm | 1991 mm |
Vehicle Height | 1330 mm | 1849 mm |
Wheelbase Size | 2510 mm | 3020 mm |
Fuel Tank Capacity | 100 L | 83 L |