1962 Alfa Romeo 2600 vs. 2010 Saab 05-Sep
To start off, 2010 Saab 05-Sep is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 2,583 cc (6 cylinders), 1962 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 2010 Saab 05-Sep (260 HP @ 5300 RPM) has 97 more horse power than 1962 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2010 Saab 05-Sep should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2010 Saab 05-Sep weights approximately 771 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2010 Saab 05-Sep, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Saab 05-Sep (350 Nm @ 1900 RPM) has 130 more torque (in Nm) than 1962 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2010 Saab 05-Sep will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2010 Saab 05-Sep has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Saab 05-Sep will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Alfa Romeo 2600 | 2010 Saab 05-Sep | |
| Make | Alfa Romeo | Saab |
| Model | 2600 | 05-Sep |
| Year Released | 1962 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2583 cc | 2290 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 163 HP | 260 HP |
| Engine RPM | 5900 RPM | 5300 RPM |
| Torque | 220 Nm | 350 Nm |
| Torque RPM | 4000 RPM | 1900 RPM |
| Engine Compression Ratio | 9.0:1 | 10.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1370 kg | 2141 kg |
| Vehicle Length | 4590 mm | 4840 mm |
| Vehicle Width | 1710 mm | 1800 mm |
| Vehicle Height | 1330 mm | 1460 mm |
| Wheelbase Size | 2510 mm | 2710 mm |
| Fuel Tank Capacity | 60 L | 70 L |
