1962 Alfa Romeo 2600 vs. 2011 Ford Fusion
To start off, 2011 Ford Fusion is newer by 49 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 3,500 cc (6 cylinders), 2011 Ford Fusion is equipped with a bigger engine. In terms of performance, 2011 Ford Fusion (263 HP @ 6250 RPM) has 100 more horse power than 1962 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2011 Ford Fusion should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2011 Ford Fusion weights approximately 259 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2011 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford Fusion (337 Nm @ 4500 RPM) has 117 more torque (in Nm) than 1962 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2011 Ford Fusion will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2011 Ford Fusion has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford Fusion will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Alfa Romeo 2600 | 2011 Ford Fusion | |
Make | Alfa Romeo | Ford |
Model | 2600 | Fusion |
Year Released | 1962 | 2011 |
Engine Position | Front | Front |
Engine Size | 2583 cc | 3500 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 163 HP | 263 HP |
Engine RPM | 5900 RPM | 6250 RPM |
Torque | 220 Nm | 337 Nm |
Torque RPM | 4000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1370 kg | 1629 kg |
Vehicle Length | 4590 mm | 4841 mm |
Vehicle Width | 1710 mm | 1834 mm |
Vehicle Height | 1330 mm | 1445 mm |
Wheelbase Size | 2510 mm | 2728 mm |
Fuel Tank Capacity | 60 L | 66 L |