1962 Alfa Romeo 2600 vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1962 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1962 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (171 HP @ 6400 RPM) has 8 more horse power than 1962 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1962 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 699 kg more than 1962 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 133 more torque (in Nm) than 1962 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1962 Alfa Romeo 2600. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1962 Alfa Romeo 2600 has manual transmission. 1962 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Alfa Romeo 2600 | 2013 Chrysler 200 CONVERTIBLE | |
Make | Alfa Romeo | Chrysler |
Model | 2600 | 200 CONVERTIBLE |
Year Released | 1962 | 2013 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 2400 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 163 HP | 171 HP |
Engine RPM | 5900 RPM | 6400 RPM |
Torque | 220 Nm | 353 Nm |
Torque RPM | 4000 RPM | 4400 RPM |
Engine Bore Size | 83 mm | 96 mm |
Engine Stroke Size | 79.6 mm | 83 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1115 kg | 1814 kg |
Vehicle Length | 4410 mm | 4947 mm |
Vehicle Width | 1660 mm | 2089 mm |
Vehicle Height | 1330 mm | 1470 mm |
Wheelbase Size | 2510 mm | 2765 mm |
Fuel Tank Capacity | 47 L | 64 L |