1962 Alpine A 110 vs. 2009 Dodge Challenger

To start off, 2009 Dodge Challenger is newer by 47 year(s). Which means there will be less support and parts availability for 1962 Alpine A 110. In addition, the cost of maintenance, including insurance, on 1962 Alpine A 110 would be higher. At 6,059 cc (8 cylinders), 2009 Dodge Challenger is equipped with a bigger engine. In terms of performance, 2009 Dodge Challenger (419 HP @ 6200 RPM) has 370 more horse power than 1962 Alpine A 110. (49 HP @ 5200 RPM) In normal driving conditions, 2009 Dodge Challenger should accelerate faster than 1962 Alpine A 110. With that said, vehicle weight also plays an important factor in acceleration. 2009 Dodge Challenger weights approximately 1116 kg more than 1962 Alpine A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1962 Alpine A 110 2009 Dodge Challenger
Make Alpine Dodge
Model A 110 Challenger
Year Released 1962 2009
Body Type Coupe Coupe
Engine Position Rear Front
Engine Size 956 cc 6059 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 49 HP 419 HP
Engine RPM 5200 RPM 6200 RPM
Engine Compression Ratio 8.5:1 10.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 575 kg 1691 kg
Vehicle Length 3860 mm 5030 mm
Vehicle Width 1470 mm 1930 mm
Vehicle Height 1140 mm 1460 mm
Wheelbase Size 2140 mm 2950 mm
Fuel Tank Capacity 38 L 72 L