1962 Austin A 60 vs. 1953 Fiat 500
To start off, 1962 Austin A 60 is newer by 9 year(s). Which means there will be less support and parts availability for 1953 Fiat 500. In addition, the cost of maintenance, including insurance, on 1953 Fiat 500 would be higher. At 1,487 cc (4 cylinders), 1962 Austin A 60 is equipped with a bigger engine. In terms of performance, 1962 Austin A 60 (39 HP) has 23 more horse power than 1953 Fiat 500. (16 HP). In normal driving conditions, 1962 Austin A 60 should accelerate faster than 1953 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1962 Austin A 60 weights approximately 506 kg more than 1953 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1962 Austin A 60 | 1953 Fiat 500 | |
Make | Austin | Fiat |
Model | A 60 | 500 |
Year Released | 1962 | 1953 |
Engine Position | Front | Rear |
Engine Size | 1487 cc | 569 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 39 HP | 16 HP |
Fuel Type | Diesel | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1118 kg | 612 kg |
Vehicle Length | 4440 mm | 3250 mm |
Vehicle Width | 1610 mm | 1290 mm |
Vehicle Height | 1480 mm | 1380 mm |
Wheelbase Size | 2550 mm | 2010 mm |
Fuel Tank Capacity | 45 L | 35 L |