1962 Austin A 60 vs. 1966 Innocenti IM 3

To start off, 1966 Innocenti IM 3 is newer by 4 year(s). Which means there will be less support and parts availability for 1962 Austin A 60. In addition, the cost of maintenance, including insurance, on 1962 Austin A 60 would be higher. At 1,487 cc (4 cylinders), 1962 Austin A 60 is equipped with a bigger engine. In terms of performance, 1966 Innocenti IM 3 (56 HP) has 17 more horse power than 1962 Austin A 60. (39 HP) In normal driving conditions, 1966 Innocenti IM 3 should accelerate faster than 1962 Austin A 60. With that said, vehicle weight also plays an important factor in acceleration. 1962 Austin A 60 weights approximately 228 kg more than 1966 Innocenti IM 3.

Because 1962 Austin A 60 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin A 60. However, in wet, icy, snow, or gravel driving conditions, 1966 Innocenti IM 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Austin A 60 (87 Nm) has 4 more torque (in Nm) than 1966 Innocenti IM 3. (83 Nm). This means 1962 Austin A 60 will have an easier job in driving up hills or pulling heavy equipment than 1966 Innocenti IM 3.

Compare all specifications:

1962 Austin A 60 1966 Innocenti IM 3
Make Austin Innocenti
Model A 60 IM 3
Year Released 1962 1966
Engine Position Front Front
Engine Size 1487 cc 1098 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 39 HP 56 HP
Torque 87 Nm 83 Nm
Engine Compression Ratio 23.0:1 9.0:1
Fuel Type Diesel Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1118 kg 890 kg
Vehicle Length 4440 mm 3760 mm
Vehicle Width 1610 mm 1570 mm
Vehicle Height 1480 mm 1380 mm
Wheelbase Size 2550 mm 2380 mm