1962 Austin A 90 vs. 2008 Chevrolet Blazer
To start off, 2008 Chevrolet Blazer is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Austin A 90. In addition, the cost of maintenance, including insurance, on 1962 Austin A 90 would be higher. At 4,300 cc, 2008 Chevrolet Blazer is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chevrolet Blazer weights approximately 306 kg more than 1962 Austin A 90.
Because 2008 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 1962 Austin A 90. In wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet Blazer (339 Nm @ 2800 RPM) has 118 more torque (in Nm) than 1962 Austin A 90. (221 Nm @ 2750 RPM). This means 2008 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin A 90.
Compare all specifications:
1962 Austin A 90 | 2008 Chevrolet Blazer | |
Make | Austin | Chevrolet |
Model | A 90 | Blazer |
Year Released | 1962 | 2008 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 4300 cc |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 120 HP | 0 HP |
Torque | 221 Nm | 339 Nm |
Torque RPM | 2750 RPM | 2800 RPM |
Engine Bore Size | 83.5 mm | 101.6 mm |
Engine Stroke Size | 88.9 mm | 88.4 mm |
Engine Compression Ratio | 8.3:1 | 9.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 6 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1570 kg | 1876 kg |
Vehicle Length | 4780 mm | 4320 mm |
Vehicle Height | 1540 mm | 1500 mm |
Wheelbase Size | 2750 mm | 2720 mm |
Fuel Tank Capacity | 34 L | 68 L |