1962 Austin-Healey 3000 Mk II vs. 1955 Fiat V8
To start off, 1962 Austin-Healey 3000 Mk II is newer by 7 year(s). Which means there will be less support and parts availability for 1955 Fiat V8. In addition, the cost of maintenance, including insurance, on 1955 Fiat V8 would be higher. At 2,912 cc (6 cylinders), 1962 Austin-Healey 3000 Mk II is equipped with a bigger engine. In terms of performance, 1962 Austin-Healey 3000 Mk II (129 HP @ 4600 RPM) has 4 more horse power than 1955 Fiat V8. (125 HP @ 6600 RPM). In normal driving conditions, 1962 Austin-Healey 3000 Mk II should accelerate faster than 1955 Fiat V8. With that said, vehicle weight also plays an important factor in acceleration. 1962 Austin-Healey 3000 Mk II weights approximately 18 kg more than 1955 Fiat V8. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 1955 Fiat V8 | |
Make | Austin-Healey | Fiat |
Model | 3000 Mk II | V8 |
Year Released | 1962 | 1955 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 1996 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 129 HP | 125 HP |
Engine RPM | 4600 RPM | 6600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1158 kg | 1140 kg |
Vehicle Length | 4010 mm | 4050 mm |
Vehicle Width | 1540 mm | 1580 mm |
Vehicle Height | 1380 mm | 1300 mm |
Wheelbase Size | 2340 mm | 2410 mm |