1962 Austin-Healey 3000 Mk II vs. 2002 Chrysler 300
To start off, 2002 Chrysler 300 is newer by 40 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 3,523 cc (6 cylinders), 2002 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2002 Chrysler 300 (251 HP @ 6400 RPM) has 122 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2002 Chrysler 300 should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler 300 weights approximately 475 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Austin-Healey 3000 Mk II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin-Healey 3000 Mk II. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler 300 (346 Nm @ 3900 RPM) has 179 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2002 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2002 Chrysler 300 has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 2002 Chrysler 300 | |
Make | Austin-Healey | Chrysler |
Model | 3000 Mk II | 300 |
Year Released | 1962 | 2002 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 3523 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 129 HP | 251 HP |
Engine RPM | 4600 RPM | 6400 RPM |
Torque | 167 Nm | 346 Nm |
Torque RPM | 3000 RPM | 3900 RPM |
Engine Bore Size | 83.4 mm | 96 mm |
Engine Stroke Size | 88.9 mm | 81 mm |
Engine Compression Ratio | 9.0:1 | 9.9:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1158 kg | 1633 kg |
Vehicle Length | 4010 mm | 5030 mm |
Vehicle Width | 1540 mm | 1900 mm |
Vehicle Height | 1380 mm | 1420 mm |
Wheelbase Size | 2340 mm | 2880 mm |
Fuel Tank Capacity | 27 L | 65 L |