1962 Austin-Healey 3000 Mk II vs. 2008 Jeep Commander
To start off, 2008 Jeep Commander is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 3,699 cc (6 cylinders), 2008 Jeep Commander is equipped with a bigger engine. In terms of performance, 2008 Jeep Commander (210 HP @ 5200 RPM) has 81 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2008 Jeep Commander should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2008 Jeep Commander weights approximately 820 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Jeep Commander is four wheel drive (4WD), it will have significant more traction and grip than 1962 Austin-Healey 3000 Mk II. In wet, icy, snow, or gravel driving conditions, 2008 Jeep Commander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Jeep Commander (319 Nm @ 4000 RPM) has 152 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2008 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2008 Jeep Commander has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Jeep Commander will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 2008 Jeep Commander | |
Make | Austin-Healey | Jeep |
Model | 3000 Mk II | Commander |
Year Released | 1962 | 2008 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 3699 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 129 HP | 210 HP |
Engine RPM | 4600 RPM | 5200 RPM |
Torque | 167 Nm | 319 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Compression Ratio | 9.0:1 | 9.7:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1158 kg | 1978 kg |
Vehicle Length | 4010 mm | 4790 mm |
Vehicle Width | 1540 mm | 1910 mm |
Vehicle Height | 1380 mm | 1830 mm |
Wheelbase Size | 2340 mm | 2790 mm |
Fuel Tank Capacity | 27 L | 80 L |