1962 Austin-Healey 3000 Mk II vs. 2010 Buick Enclave
To start off, 2010 Buick Enclave is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 3,600 cc (6 cylinders), 2010 Buick Enclave is equipped with a bigger engine. In terms of performance, 2010 Buick Enclave (288 HP @ 6300 RPM) has 159 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2010 Buick Enclave should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2010 Buick Enclave weights approximately 1010 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Austin-Healey 3000 Mk II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin-Healey 3000 Mk II. However, in wet, icy, snow, or gravel driving conditions, 2010 Buick Enclave, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Buick Enclave (366 Nm @ 3400 RPM) has 199 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2010 Buick Enclave will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2010 Buick Enclave has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Buick Enclave will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 2010 Buick Enclave | |
Make | Austin-Healey | Buick |
Model | 3000 Mk II | Enclave |
Year Released | 1962 | 2010 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 3600 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 129 HP | 288 HP |
Engine RPM | 4600 RPM | 6300 RPM |
Torque | 167 Nm | 366 Nm |
Torque RPM | 3000 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1158 kg | 2168 kg |
Vehicle Length | 4010 mm | 5126 mm |
Vehicle Width | 1540 mm | 2007 mm |
Wheelbase Size | 2340 mm | 3020 mm |
Fuel Tank Capacity | 27 L | 83 L |