1962 Austin-Healey 3000 Mk II vs. 2010 Ford Crown Victoria
To start off, 2010 Ford Crown Victoria is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 4,604 cc (8 cylinders), 2010 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2010 Ford Crown Victoria (239 HP @ 4750 RPM) has 110 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2010 Ford Crown Victoria should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Crown Victoria weights approximately 1698 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Crown Victoria (374 Nm @ 4000 RPM) has 207 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2010 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2010 Ford Crown Victoria has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 2010 Ford Crown Victoria | |
Make | Austin-Healey | Ford |
Model | 3000 Mk II | Crown Victoria |
Year Released | 1962 | 2010 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 4604 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 129 HP | 239 HP |
Engine RPM | 4600 RPM | 4750 RPM |
Torque | 167 Nm | 374 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Bore Size | 83.4 mm | 90.2 mm |
Engine Stroke Size | 88.9 mm | 90 mm |
Engine Compression Ratio | 9.0:1 | 9.4:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1158 kg | 2856 kg |
Vehicle Length | 4010 mm | 5390 mm |
Vehicle Width | 1540 mm | 1970 mm |
Vehicle Height | 1380 mm | 1450 mm |
Wheelbase Size | 2340 mm | 2920 mm |
Fuel Tank Capacity | 27 L | 72 L |