1962 Austin-Healey 3000 Mk II vs. 2010 Proton Savvy
To start off, 2010 Proton Savvy is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 2,912 cc (6 cylinders), 1962 Austin-Healey 3000 Mk II is equipped with a bigger engine. In terms of performance, 1962 Austin-Healey 3000 Mk II (129 HP) has 55 more horse power than 2010 Proton Savvy. (74 HP). In normal driving conditions, 1962 Austin-Healey 3000 Mk II should accelerate faster than 2010 Proton Savvy. With that said, vehicle weight also plays an important factor in acceleration. 1962 Austin-Healey 3000 Mk II weights approximately 213 kg more than 2010 Proton Savvy. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Austin-Healey 3000 Mk II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin-Healey 3000 Mk II. However, in wet, icy, snow, or gravel driving conditions, 2010 Proton Savvy, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Austin-Healey 3000 Mk II (167 Nm @ 3000 RPM) has 62 more torque (in Nm) than 2010 Proton Savvy. (105 Nm @ 4250 RPM). This means 1962 Austin-Healey 3000 Mk II will have an easier job in driving up hills or pulling heavy equipment than 2010 Proton Savvy. 2010 Proton Savvy has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Proton Savvy will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Austin-Healey 3000 Mk II | 2010 Proton Savvy | |
| Make | Austin-Healey | Proton |
| Model | 3000 Mk II | Savvy |
| Year Released | 1962 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 1499 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 129 HP | 74 HP |
| Torque | 167 Nm | 105 Nm |
| Torque RPM | 3000 RPM | 4250 RPM |
| Engine Compression Ratio | 9.0:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 181 km/hour | 165 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1158 kg | 945 kg |
| Vehicle Length | 4010 mm | 3720 mm |
| Vehicle Width | 1540 mm | 1650 mm |
| Vehicle Height | 1380 mm | 1490 mm |
| Wheelbase Size | 2340 mm | 2400 mm |
| Fuel Tank Capacity | 27 L | 40 L |
