1962 Austin-Healey 3000 Mk II vs. 2011 Fiat 500
To start off, 2011 Fiat 500 is newer by 49 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 2,912 cc (6 cylinders), 1962 Austin-Healey 3000 Mk II is equipped with a bigger engine. In terms of performance, 1962 Austin-Healey 3000 Mk II (129 HP @ 4600 RPM) has 61 more horse power than 2011 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 1962 Austin-Healey 3000 Mk II should accelerate faster than 2011 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1962 Austin-Healey 3000 Mk II weights approximately 218 kg more than 2011 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Austin-Healey 3000 Mk II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Austin-Healey 3000 Mk II. However, in wet, icy, snow, or gravel driving conditions, 2011 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Austin-Healey 3000 Mk II (167 Nm @ 3000 RPM) has 65 more torque (in Nm) than 2011 Fiat 500. (102 Nm @ 3000 RPM). This means 1962 Austin-Healey 3000 Mk II will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat 500. 2011 Fiat 500 has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Fiat 500 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Austin-Healey 3000 Mk II | 2011 Fiat 500 | |
| Make | Austin-Healey | Fiat |
| Model | 3000 Mk II | 500 |
| Year Released | 1962 | 2011 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 1242 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 129 HP | 68 HP |
| Engine RPM | 4600 RPM | 5500 RPM |
| Torque | 167 Nm | 102 Nm |
| Torque RPM | 3000 RPM | 3000 RPM |
| Engine Bore Size | 83.4 mm | 70.8 mm |
| Engine Stroke Size | 88.9 mm | 78.9 mm |
| Engine Compression Ratio | 9.0:1 | 11.1:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 181 km/hour | 160 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 1158 kg | 940 kg |
| Vehicle Length | 4010 mm | 3550 mm |
| Vehicle Width | 1540 mm | 1630 mm |
| Vehicle Height | 1380 mm | 1490 mm |
| Wheelbase Size | 2340 mm | 2310 mm |
| Fuel Tank Capacity | 27 L | 35 L |
