1962 Austin-Healey 3000 Mk II vs. 2013 Jeep Grand Cherokee
To start off, 2013 Jeep Grand Cherokee is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 6,400 cc (8 cylinders), 2013 Jeep Grand Cherokee is equipped with a bigger engine. In terms of performance, 2013 Jeep Grand Cherokee (459 HP @ 6000 RPM) has 330 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2013 Jeep Grand Cherokee should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2013 Jeep Grand Cherokee weights approximately 1178 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Jeep Grand Cherokee is four wheel drive (4WD), it will have significant more traction and grip than 1962 Austin-Healey 3000 Mk II. In wet, icy, snow, or gravel driving conditions, 2013 Jeep Grand Cherokee will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Jeep Grand Cherokee (630 Nm @ 4200 RPM) has 463 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2013 Jeep Grand Cherokee will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2013 Jeep Grand Cherokee has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Jeep Grand Cherokee will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Austin-Healey 3000 Mk II | 2013 Jeep Grand Cherokee | |
Make | Austin-Healey | Jeep |
Model | 3000 Mk II | Grand Cherokee |
Year Released | 1962 | 2013 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 6400 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 129 HP | 459 HP |
Engine RPM | 4600 RPM | 6000 RPM |
Torque | 167 Nm | 630 Nm |
Torque RPM | 3000 RPM | 4200 RPM |
Engine Bore Size | 83.4 mm | 103 mm |
Engine Stroke Size | 88.9 mm | 94 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | 5-speed automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1158 kg | 2336 kg |
Vehicle Length | 4010 mm | 4859 mm |
Vehicle Width | 1540 mm | 2156 mm |
Vehicle Height | 1380 mm | 1756 mm |
Wheelbase Size | 2340 mm | 2916 mm |
Fuel Tank Capacity | 27 L | 93 L |