1962 Austin-Healey 3000 Mk II vs. 2013 Toyota FJ Cruiser
To start off, 2013 Toyota FJ Cruiser is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Austin-Healey 3000 Mk II. In addition, the cost of maintenance, including insurance, on 1962 Austin-Healey 3000 Mk II would be higher. At 4,000 cc (6 cylinders), 2013 Toyota FJ Cruiser is equipped with a bigger engine. In terms of performance, 2013 Toyota FJ Cruiser (256 HP @ 5600 RPM) has 127 more horse power than 1962 Austin-Healey 3000 Mk II. (129 HP @ 4600 RPM) In normal driving conditions, 2013 Toyota FJ Cruiser should accelerate faster than 1962 Austin-Healey 3000 Mk II. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota FJ Cruiser weights approximately 805 kg more than 1962 Austin-Healey 3000 Mk II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Toyota FJ Cruiser is four wheel drive (4WD), it will have significant more traction and grip than 1962 Austin-Healey 3000 Mk II. In wet, icy, snow, or gravel driving conditions, 2013 Toyota FJ Cruiser will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota FJ Cruiser (367 Nm @ 4400 RPM) has 200 more torque (in Nm) than 1962 Austin-Healey 3000 Mk II. (167 Nm @ 3000 RPM). This means 2013 Toyota FJ Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1962 Austin-Healey 3000 Mk II. 2013 Toyota FJ Cruiser has automatic transmission and 1962 Austin-Healey 3000 Mk II has manual transmission. 1962 Austin-Healey 3000 Mk II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota FJ Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Austin-Healey 3000 Mk II | 2013 Toyota FJ Cruiser | |
| Make | Austin-Healey | Toyota |
| Model | 3000 Mk II | FJ Cruiser |
| Year Released | 1962 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 4000 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 129 HP | 256 HP |
| Engine RPM | 4600 RPM | 5600 RPM |
| Torque | 167 Nm | 367 Nm |
| Torque RPM | 3000 RPM | 4400 RPM |
| Engine Bore Size | 83.4 mm | 94 mm |
| Engine Stroke Size | 88.9 mm | 95 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | 5-speed automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1158 kg | 1963 kg |
| Vehicle Length | 4010 mm | 4670 mm |
| Vehicle Width | 1540 mm | 1905 mm |
| Vehicle Height | 1380 mm | 1830 mm |
| Wheelbase Size | 2340 mm | 2690 mm |
| Fuel Tank Capacity | 27 L | 72 L |
