1962 Buick Invicta vs. 1988 Ferrari 412 GT

To start off, 1988 Ferrari 412 GT is newer by 26 year(s). Which means there will be less support and parts availability for 1962 Buick Invicta. In addition, the cost of maintenance, including insurance, on 1962 Buick Invicta would be higher. At 6,576 cc (8 cylinders), 1962 Buick Invicta is equipped with a bigger engine. In terms of performance, 1988 Ferrari 412 GT (340 HP @ 6000 RPM) has 15 more horse power than 1962 Buick Invicta. (325 HP @ 4400 RPM) In normal driving conditions, 1988 Ferrari 412 GT should accelerate faster than 1962 Buick Invicta. With that said, vehicle weight also plays an important factor in acceleration. 1962 Buick Invicta weights approximately 185 kg more than 1988 Ferrari 412 GT.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Buick Invicta (583 Nm @ 3000 RPM) has 132 more torque (in Nm) than 1988 Ferrari 412 GT. (451 Nm @ 4200 RPM). This means 1962 Buick Invicta will have an easier job in driving up hills or pulling heavy equipment than 1988 Ferrari 412 GT. 1962 Buick Invicta has automatic transmission and 1988 Ferrari 412 GT has manual transmission. 1988 Ferrari 412 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1962 Buick Invicta will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Buick Invicta 1988 Ferrari 412 GT
Make Buick Ferrari
Model Invicta 412 GT
Year Released 1962 1988
Engine Position Front Front
Engine Size 6576 cc 4942 cc
Engine Cylinders 8 cylinders 12 cylinders
Engine Type V V
Valves per Cylinder 2 valves 2 valves
Horse Power 325 HP 340 HP
Engine RPM 4400 RPM 6000 RPM
Torque 583 Nm 451 Nm
Torque RPM 3000 RPM 4200 RPM
Engine Bore Size 106.2 mm 82.1 mm
Engine Stroke Size 92.5 mm 78 mm
Engine Compression Ratio 10.3:1 9.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 2070 kg 1885 kg
Vehicle Length 5550 mm 4820 mm
Vehicle Width 1990 mm 1800 mm