1962 Chevrolet Corvette vs. 2010 Fiat Linea

To start off, 2010 Fiat Linea is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1962 Chevrolet Corvette would be higher. At 5,354 cc (8 cylinders), 1962 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 1962 Chevrolet Corvette (251 HP @ 4400 RPM) has 162 more horse power than 2010 Fiat Linea. (89 HP @ 4000 RPM). In normal driving conditions, 1962 Chevrolet Corvette should accelerate faster than 2010 Fiat Linea. With that said, vehicle weight also plays an important factor in acceleration. 1962 Chevrolet Corvette weights approximately 130 kg more than 2010 Fiat Linea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Linea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Chevrolet Corvette (475 Nm @ 2800 RPM) has 275 more torque (in Nm) than 2010 Fiat Linea. (200 Nm @ 1750 RPM). This means 1962 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Linea.

Compare all specifications:

1962 Chevrolet Corvette 2010 Fiat Linea
Make Chevrolet Fiat
Model Corvette Linea
Year Released 1962 2010
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 5354 cc 1248 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 251 HP 89 HP
Engine RPM 4400 RPM 4000 RPM
Torque 475 Nm 200 Nm
Torque RPM 2800 RPM 1750 RPM
Engine Bore Size 101.6 mm 69.7 mm
Engine Stroke Size 82.6 mm 82.2 mm
Engine Compression Ratio 10.5:1 17.6:1
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1315 kg 1185 kg
Vehicle Length 4500 mm 4570 mm
Vehicle Width 1780 mm 1950 mm
Vehicle Height 1280 mm 1500 mm
Wheelbase Size 2600 mm 2610 mm