1962 Ferrari 250 GTE vs. 1980 Honda Ballade
To start off, 1980 Honda Ballade is newer by 18 year(s). Which means there will be less support and parts availability for 1962 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1962 Ferrari 250 GTE would be higher. At 2,953 cc (12 cylinders), 1962 Ferrari 250 GTE is equipped with a bigger engine. In terms of performance, 1962 Ferrari 250 GTE (235 HP) has 168 more horse power than 1980 Honda Ballade. (67 HP). In normal driving conditions, 1962 Ferrari 250 GTE should accelerate faster than 1980 Honda Ballade. With that said, vehicle weight also plays an important factor in acceleration. 1962 Ferrari 250 GTE weights approximately 624 kg more than 1980 Honda Ballade. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Ferrari 250 GTE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Ferrari 250 GTE. However, in wet, icy, snow, or gravel driving conditions, 1980 Honda Ballade, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Ferrari 250 GTE (245 Nm @ 5000 RPM) has 137 more torque (in Nm) than 1980 Honda Ballade. (108 Nm @ 3000 RPM). This means 1962 Ferrari 250 GTE will have an easier job in driving up hills or pulling heavy equipment than 1980 Honda Ballade. 1980 Honda Ballade has automatic transmission and 1962 Ferrari 250 GTE has manual transmission. 1962 Ferrari 250 GTE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Honda Ballade will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Ferrari 250 GTE | 1980 Honda Ballade | |
| Make | Ferrari | Honda |
| Model | 250 GTE | Ballade |
| Year Released | 1962 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 2953 cc | 1335 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 3 valves |
| Horse Power | 235 HP | 67 HP |
| Torque | 245 Nm | 108 Nm |
| Torque RPM | 5000 RPM | 3000 RPM |
| Engine Bore Size | 73 mm | 72 mm |
| Engine Stroke Size | 58.8 mm | 82 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1410 kg | 786 kg |
| Vehicle Length | 4710 mm | 4150 mm |
| Vehicle Width | 1780 mm | 1610 mm |
| Vehicle Height | 1370 mm | 1350 mm |
| Wheelbase Size | 2600 mm | 2330 mm |
