1962 Fiat 2300 vs. 2005 Peugeot 1007

To start off, 2005 Peugeot 1007 is newer by 43 year(s). Which means there will be less support and parts availability for 1962 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1962 Fiat 2300 would be higher. At 2,279 cc (6 cylinders), 1962 Fiat 2300 is equipped with a bigger engine. In terms of performance, 1962 Fiat 2300 (104 HP) has 32 more horse power than 2005 Peugeot 1007. (72 HP). In normal driving conditions, 1962 Fiat 2300 should accelerate faster than 2005 Peugeot 1007. With that said, vehicle weight also plays an important factor in acceleration. 1962 Fiat 2300 weights approximately 95 kg more than 2005 Peugeot 1007. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Fiat 2300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Fiat 2300. However, in wet, icy, snow, or gravel driving conditions, 2005 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Fiat 2300 (167 Nm @ 2800 RPM) has 49 more torque (in Nm) than 2005 Peugeot 1007. (118 Nm @ 3300 RPM). This means 1962 Fiat 2300 will have an easier job in driving up hills or pulling heavy equipment than 2005 Peugeot 1007. 2005 Peugeot 1007 has automatic transmission and 1962 Fiat 2300 has manual transmission. 1962 Fiat 2300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Peugeot 1007 will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Fiat 2300 2005 Peugeot 1007
Make Fiat Peugeot
Model 2300 1007
Year Released 1962 2005
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2279 cc 1360 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 104 HP 72 HP
Torque 167 Nm 118 Nm
Torque RPM 2800 RPM 3300 RPM
Engine Compression Ratio 8.8:1 10.5:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1310 kg 1215 kg
Vehicle Length 4630 mm 3740 mm
Vehicle Width 1640 mm 1670 mm
Vehicle Height 1370 mm 1630 mm
Wheelbase Size 2660 mm 2480 mm
Fuel Tank Capacity 70 L 40 L