1962 Fiat 500 vs. 2008 Fiat Palio
To start off, 2008 Fiat Palio is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Fiat 500. In addition, the cost of maintenance, including insurance, on 1962 Fiat 500 would be higher. At 1,241 cc (4 cylinders), 2008 Fiat Palio is equipped with a bigger engine.
Because 1962 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Palio (102 Nm @ 3250 RPM) has 66 more torque (in Nm) than 1962 Fiat 500. (36 Nm @ 3500 RPM). This means 2008 Fiat Palio will have an easier job in driving up hills or pulling heavy equipment than 1962 Fiat 500.
Compare all specifications:
| 1962 Fiat 500 | 2008 Fiat Palio | |
| Make | Fiat | Fiat |
| Model | 500 | Palio |
| Year Released | 1962 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 499 cc | 1241 cc |
| Engine Cylinders | 2 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 22 HP | 0 HP |
| Torque | 36 Nm | 102 Nm |
| Torque RPM | 3500 RPM | 3250 RPM |
| Engine Bore Size | 67.4 mm | 70.8 mm |
| Engine Stroke Size | 70 mm | 78.9 mm |
| Engine Compression Ratio | 7.1:1 | 9.1:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Length | 2980 mm | 3550 mm |
| Vehicle Height | 1330 mm | 1490 mm |
| Wheelbase Size | 1850 mm | 2370 mm |
| Fuel Tank Capacity | 38 L | 47 L |
