1962 Fiat Berline vs. 2008 Rover 75
To start off, 2008 Rover 75 is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Fiat Berline. In addition, the cost of maintenance, including insurance, on 1962 Fiat Berline would be higher. At 2,497 cc, 2008 Rover 75 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Rover 75 weights approximately 265 kg more than 1962 Fiat Berline.
Because 1962 Fiat Berline is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Fiat Berline. However, in wet, icy, snow, or gravel driving conditions, 2008 Rover 75, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Rover 75 (240 Nm @ 4000 RPM) has 52 more torque (in Nm) than 1962 Fiat Berline. (188 Nm @ 3000 RPM). This means 2008 Rover 75 will have an easier job in driving up hills or pulling heavy equipment than 1962 Fiat Berline.
Compare all specifications:
| 1962 Fiat Berline | 2008 Rover 75 | |
| Make | Fiat | Rover |
| Model | Berline | 75 |
| Year Released | 1962 | 2008 |
| Engine Size | 2279 cc | 2497 cc |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 115 HP | 0 HP |
| Torque | 188 Nm | 240 Nm |
| Torque RPM | 3000 RPM | 4000 RPM |
| Engine Bore Size | 78 mm | 80 mm |
| Engine Stroke Size | 79.5 mm | 82.8 mm |
| Engine Compression Ratio | 9.5:1 | 10.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1270 kg | 1535 kg |
| Vehicle Length | 4760 mm | 4000 mm |
| Vehicle Height | 1490 mm | 1420 mm |
| Wheelbase Size | 2660 mm | 2750 mm |
| Fuel Tank Capacity | 38 L | 65 L |
