1962 Ford Consul vs. 1974 Mazda RX-3

To start off, 1974 Mazda RX-3 is newer by 12 year(s). Which means there will be less support and parts availability for 1962 Ford Consul. In addition, the cost of maintenance, including insurance, on 1962 Ford Consul would be higher. At 1,962 cc, 1974 Mazda RX-3 is equipped with a bigger engine. In terms of performance, 1974 Mazda RX-3 (100 HP @ 7000 RPM) has 55 more horse power than 1962 Ford Consul. (45 HP @ 4800 RPM) In normal driving conditions, 1974 Mazda RX-3 should accelerate faster than 1962 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 1974 Mazda RX-3 weights approximately 68 kg more than 1962 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1974 Mazda RX-3 (135 Nm @ 4000 RPM) has 50 more torque (in Nm) than 1962 Ford Consul. (85 Nm @ 2700 RPM). This means 1974 Mazda RX-3 will have an easier job in driving up hills or pulling heavy equipment than 1962 Ford Consul.

Compare all specifications:

1962 Ford Consul 1974 Mazda RX-3
Make Ford Mazda
Model Consul RX-3
Year Released 1962 1974
Engine Position Front Front
Engine Size 1198 cc 1962 cc
Engine Type in-line dual-disk rotary
Horse Power 45 HP 100 HP
Engine RPM 4800 RPM 7000 RPM
Torque 85 Nm 135 Nm
Torque RPM 2700 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Vehicle Weight 782 kg 850 kg
Vehicle Length 4280 mm 4090 mm
Vehicle Width 1600 mm 1600 mm
Vehicle Height 1450 mm 1380 mm
Wheelbase Size 2500 mm 2320 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]