1962 Jeep CJ5 vs. 1956 MG MGA
To start off, 1962 Jeep CJ5 is newer by 6 year(s). Which means there will be less support and parts availability for 1956 MG MGA. In addition, the cost of maintenance, including insurance, on 1956 MG MGA would be higher. At 2,199 cc (4 cylinders), 1962 Jeep CJ5 is equipped with a bigger engine. In terms of performance, 1956 MG MGA (89 HP @ 5400 RPM) has 30 more horse power than 1962 Jeep CJ5. (59 HP @ 3600 RPM) In normal driving conditions, 1956 MG MGA should accelerate faster than 1962 Jeep CJ5. With that said, vehicle weight also plays an important factor in acceleration. 1962 Jeep CJ5 weights approximately 130 kg more than 1956 MG MGA.
Because 1962 Jeep CJ5 is four wheel drive (4WD), it will have significant more traction and grip than 1956 MG MGA. In wet, icy, snow, or gravel driving conditions, 1962 Jeep CJ5 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 MG MGA (149 Nm @ 3000 RPM) has 4 more torque (in Nm) than 1962 Jeep CJ5. (145 Nm @ 3600 RPM). This means 1956 MG MGA will have an easier job in driving up hills or pulling heavy equipment than 1962 Jeep CJ5.
Compare all specifications:
1962 Jeep CJ5 | 1956 MG MGA | |
Make | Jeep | MG |
Model | CJ5 | MGA |
Year Released | 1962 | 1956 |
Body Type | SUV | Convertible |
Engine Position | Front | Front |
Engine Size | 2199 cc | 1798 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 89 HP |
Engine RPM | 3600 RPM | 5400 RPM |
Torque | 145 Nm | 149 Nm |
Torque RPM | 3600 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1030 kg | 900 kg |
Vehicle Length | 3520 mm | 3970 mm |
Vehicle Width | 1550 mm | 1460 mm |
Vehicle Height | 1740 mm | 1280 mm |
Wheelbase Size | 2060 mm | 2390 mm |