1962 Lancia Appia vs. 1985 Mercedes-Benz 200

To start off, 1985 Mercedes-Benz 200 is newer by 23 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 1,997 cc (4 cylinders), 1985 Mercedes-Benz 200 is equipped with a bigger engine. In terms of performance, 1985 Mercedes-Benz 200 (122 HP @ 5100 RPM) has 70 more horse power than 1962 Lancia Appia. (52 HP @ 4900 RPM) In normal driving conditions, 1985 Mercedes-Benz 200 should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1985 Mercedes-Benz 200 weights approximately 440 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Mercedes-Benz 200 (178 Nm @ 3500 RPM) has 91 more torque (in Nm) than 1962 Lancia Appia. (87 Nm @ 3500 RPM). This means 1985 Mercedes-Benz 200 will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 1985 Mercedes-Benz 200 has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1985 Mercedes-Benz 200 will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Lancia Appia 1985 Mercedes-Benz 200
Make Lancia Mercedes-Benz
Model Appia 200
Year Released 1962 1985
Engine Position Front Front
Engine Size 1090 cc 1997 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 52 HP 122 HP
Engine RPM 4900 RPM 5100 RPM
Torque 87 Nm 178 Nm
Torque RPM 3500 RPM 3500 RPM
Engine Bore Size 68 mm 89.1 mm
Engine Stroke Size 75 mm 80.3 mm
Engine Compression Ratio 9.0:1 9.1:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 950 kg 1390 kg
Vehicle Length 4160 mm 4750 mm
Vehicle Width 1520 mm 1750 mm
Vehicle Height 1330 mm 1450 mm
Wheelbase Size 2520 mm 2810 mm
Fuel Tank Capacity 42 L 70 L