1962 Lancia Appia vs. 2002 Mercedes-Benz E

To start off, 2002 Mercedes-Benz E is newer by 40 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 5,439 cc (8 cylinders), 2002 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2002 Mercedes-Benz E (349 HP @ 5500 RPM) has 297 more horse power than 1962 Lancia Appia. (52 HP @ 4900 RPM) In normal driving conditions, 2002 Mercedes-Benz E should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2002 Mercedes-Benz E weights approximately 860 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Mercedes-Benz E (530 Nm @ 3000 RPM) has 443 more torque (in Nm) than 1962 Lancia Appia. (87 Nm @ 3500 RPM). This means 2002 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2002 Mercedes-Benz E has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Mercedes-Benz E will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Lancia Appia 2002 Mercedes-Benz E
Make Lancia Mercedes-Benz
Model Appia E
Year Released 1962 2002
Engine Position Front Front
Engine Size 1090 cc 5439 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 3 valves
Horse Power 52 HP 349 HP
Engine RPM 4900 RPM 5500 RPM
Torque 87 Nm 530 Nm
Torque RPM 3500 RPM 3000 RPM
Engine Bore Size 68 mm 97 mm
Engine Stroke Size 75 mm 92 mm
Engine Compression Ratio 9.0:1 10.5:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 950 kg 1810 kg
Vehicle Length 4160 mm 4850 mm
Vehicle Width 1520 mm 1810 mm
Vehicle Height 1330 mm 1480 mm
Wheelbase Size 2520 mm 2970 mm
Fuel Tank Capacity 42 L 79 L