1962 Lancia Appia vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 1,242 cc (4 cylinders), 2010 Fiat Panda is equipped with a bigger engine. In terms of performance, 2010 Fiat Panda (59 HP @ 5000 RPM) has 12 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM) In normal driving conditions, 2010 Fiat Panda should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Panda weights approximately 53 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Panda (102 Nm @ 2500 RPM) has 25 more torque (in Nm) than 1962 Lancia Appia. (77 Nm @ 3000 RPM). This means 2010 Fiat Panda will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2010 Fiat Panda has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Fiat Panda will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Lancia Appia | 2010 Fiat Panda | |
| Make | Lancia | Fiat |
| Model | Appia | Panda |
| Year Released | 1962 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1089 cc | 1242 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 47 HP | 59 HP |
| Engine RPM | 4800 RPM | 5000 RPM |
| Torque | 77 Nm | 102 Nm |
| Torque RPM | 3000 RPM | 2500 RPM |
| Engine Bore Size | 68 mm | 70.9 mm |
| Engine Stroke Size | 75 mm | 78.9 mm |
| Engine Compression Ratio | 8.0:1 | 9.8:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 900 kg | 953 kg |
| Vehicle Length | 4020 mm | 3540 mm |
| Vehicle Width | 1490 mm | 1600 mm |
| Vehicle Height | 1410 mm | 1580 mm |
| Wheelbase Size | 2520 mm | 2310 mm |
| Fuel Consumption Overall | 10.1 L/100km | 5.6 L/100km |
| Fuel Tank Capacity | 37 L | 35 L |
