1962 Lancia Appia vs. 2010 Ford Crown Victoria
To start off, 2010 Ford Crown Victoria is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 4,601 cc (8 cylinders), 2010 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2010 Ford Crown Victoria (225 HP @ 4800 RPM) has 178 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM) In normal driving conditions, 2010 Ford Crown Victoria should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Crown Victoria weights approximately 940 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Crown Victoria (369 Nm @ 4000 RPM) has 292 more torque (in Nm) than 1962 Lancia Appia. (77 Nm @ 3000 RPM). This means 2010 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2010 Ford Crown Victoria has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Lancia Appia | 2010 Ford Crown Victoria | |
| Make | Lancia | Ford |
| Model | Appia | Crown Victoria |
| Year Released | 1962 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1089 cc | 4601 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 47 HP | 225 HP |
| Engine RPM | 4800 RPM | 4800 RPM |
| Torque | 77 Nm | 369 Nm |
| Torque RPM | 3000 RPM | 4000 RPM |
| Engine Bore Size | 68 mm | 90.2 mm |
| Engine Stroke Size | 75 mm | 89.9 mm |
| Engine Compression Ratio | 8.0:1 | 9.4:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 900 kg | 1840 kg |
| Vehicle Length | 4020 mm | 5390 mm |
| Vehicle Width | 1490 mm | 2000 mm |
| Vehicle Height | 1410 mm | 1490 mm |
| Wheelbase Size | 2520 mm | 2920 mm |
| Fuel Consumption Overall | 10.1 L/100km | 11.8 L/100km |
| Fuel Tank Capacity | 37 L | 72 L |
