1962 Lancia Flavia vs. 2009 Mercedes-Benz CL

To start off, 2009 Mercedes-Benz CL is newer by 47 year(s). Which means there will be less support and parts availability for 1962 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Flavia would be higher. At 6,208 cc (8 cylinders), 2009 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CL (518 HP @ 6800 RPM) has 442 more horse power than 1962 Lancia Flavia. (76 HP @ 5800 RPM) In normal driving conditions, 2009 Mercedes-Benz CL should accelerate faster than 1962 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CL weights approximately 136 kg more than 1962 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CL (630 Nm @ 5000 RPM) has 515 more torque (in Nm) than 1962 Lancia Flavia. (115 Nm @ 4500 RPM). This means 2009 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Flavia. 2009 Mercedes-Benz CL has automatic transmission and 1962 Lancia Flavia has manual transmission. 1962 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Lancia Flavia 2009 Mercedes-Benz CL
Make Lancia Mercedes-Benz
Model Flavia CL
Year Released 1962 2009
Engine Position Front Front
Engine Size 1488 cc 6208 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type boxer V
Valves per Cylinder 2 valves 4 valves
Horse Power 76 HP 518 HP
Engine RPM 5800 RPM 6800 RPM
Torque 115 Nm 630 Nm
Torque RPM 4500 RPM 5000 RPM
Engine Bore Size 82 mm 102.2 mm
Engine Stroke Size 71 mm 94.6 mm
Engine Compression Ratio 8.0:1 11.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1190 kg 1326 kg
Vehicle Length 4590 mm 5070 mm
Vehicle Width 1620 mm 1420 mm
Vehicle Height 1510 mm 1880 mm
Wheelbase Size 2660 mm 2960 mm
Fuel Tank Capacity 55 L 90 L