1962 Lancia Flavia vs. 2013 Cadillac SRX

To start off, 2013 Cadillac SRX is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Flavia would be higher. At 3,600 cc (6 cylinders), 2013 Cadillac SRX is equipped with a bigger engine. In terms of performance, 2013 Cadillac SRX (304 HP @ 6800 RPM) has 228 more horse power than 1962 Lancia Flavia. (76 HP @ 5800 RPM) In normal driving conditions, 2013 Cadillac SRX should accelerate faster than 1962 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac SRX weights approximately 1290 kg more than 1962 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Lancia Flavia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Lancia Flavia. However, in wet, icy, snow, or gravel driving conditions, 2013 Cadillac SRX, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac SRX (359 Nm @ 2400 RPM) has 244 more torque (in Nm) than 1962 Lancia Flavia. (115 Nm @ 4500 RPM). This means 2013 Cadillac SRX will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Flavia. 2013 Cadillac SRX has automatic transmission and 1962 Lancia Flavia has manual transmission. 1962 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac SRX will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Lancia Flavia 2013 Cadillac SRX
Make Lancia Cadillac
Model Flavia SRX
Year Released 1962 2013
Engine Position Front Front
Engine Size 1488 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type boxer V
Valves per Cylinder 2 valves 4 valves
Horse Power 76 HP 304 HP
Engine RPM 5800 RPM 6800 RPM
Torque 115 Nm 359 Nm
Torque RPM 4500 RPM 2400 RPM
Engine Bore Size 82 mm 94 mm
Engine Stroke Size 71 mm 86 mm
Engine Compression Ratio 8.0:1 11.5
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 6-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1190 kg 2480 kg
Vehicle Length 4590 mm 4834 mm
Vehicle Width 1620 mm 1910 mm
Vehicle Height 1510 mm 1669 mm
Wheelbase Size 2660 mm 2807 mm
Fuel Tank Capacity 55 L 80 L