1962 Mercedes-Benz SE vs. 2010 Honda Fit
To start off, 2010 Honda Fit is newer by 48 year(s). Which means there will be less support and parts availability for 1962 Mercedes-Benz SE. In addition, the cost of maintenance, including insurance, on 1962 Mercedes-Benz SE would be higher. At 2,195 cc (6 cylinders), 1962 Mercedes-Benz SE is equipped with a bigger engine. In terms of performance, 1962 Mercedes-Benz SE (118 HP @ 4800 RPM) has 1 more horse power than 2010 Honda Fit. (117 HP @ 6600 RPM). In normal driving conditions, 1962 Mercedes-Benz SE should accelerate faster than 2010 Honda Fit. With that said, vehicle weight also plays an important factor in acceleration. 1962 Mercedes-Benz SE weights approximately 243 kg more than 2010 Honda Fit. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Mercedes-Benz SE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Mercedes-Benz SE. However, in wet, icy, snow, or gravel driving conditions, 2010 Honda Fit, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Mercedes-Benz SE (189 Nm @ 3900 RPM) has 45 more torque (in Nm) than 2010 Honda Fit. (144 Nm @ 4800 RPM). This means 1962 Mercedes-Benz SE will have an easier job in driving up hills or pulling heavy equipment than 2010 Honda Fit. 2010 Honda Fit has automatic transmission and 1962 Mercedes-Benz SE has manual transmission. 1962 Mercedes-Benz SE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Honda Fit will be easier to drive especially in heavy traffic.
Compare all specifications:
1962 Mercedes-Benz SE | 2010 Honda Fit | |
Make | Mercedes-Benz | Honda |
Model | SE | Fit |
Year Released | 1962 | 2010 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 2195 cc | 1500 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 118 HP | 117 HP |
Engine RPM | 4800 RPM | 6600 RPM |
Torque | 189 Nm | 144 Nm |
Torque RPM | 3900 RPM | 4800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 5-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Weight | 1375 kg | 1132 kg |
Vehicle Length | 4880 mm | 4105 mm |
Vehicle Width | 1800 mm | 1694 mm |
Vehicle Height | 1450 mm | 1524 mm |
Wheelbase Size | 2760 mm | 2499 mm |
Fuel Tank Capacity | 52 L | 40 L |