1962 Mercedes-Benz SE vs. 2013 Toyota Venza
To start off, 2013 Toyota Venza is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Mercedes-Benz SE. In addition, the cost of maintenance, including insurance, on 1962 Mercedes-Benz SE would be higher. At 2,700 cc (4 cylinders), 2013 Toyota Venza is equipped with a bigger engine. In terms of performance, 2013 Toyota Venza (179 HP @ 5800 RPM) has 61 more horse power than 1962 Mercedes-Benz SE. (118 HP @ 4800 RPM) In normal driving conditions, 2013 Toyota Venza should accelerate faster than 1962 Mercedes-Benz SE. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Venza weights approximately 330 kg more than 1962 Mercedes-Benz SE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Mercedes-Benz SE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Mercedes-Benz SE. However, in wet, icy, snow, or gravel driving conditions, 2013 Toyota Venza, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Venza (247 Nm @ 4200 RPM) has 58 more torque (in Nm) than 1962 Mercedes-Benz SE. (189 Nm @ 3900 RPM). This means 2013 Toyota Venza will have an easier job in driving up hills or pulling heavy equipment than 1962 Mercedes-Benz SE. 2013 Toyota Venza has automatic transmission and 1962 Mercedes-Benz SE has manual transmission. 1962 Mercedes-Benz SE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Venza will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1962 Mercedes-Benz SE | 2013 Toyota Venza | |
| Make | Mercedes-Benz | Toyota |
| Model | SE | Venza |
| Year Released | 1962 | 2013 |
| Body Type | Coupe | Crossover |
| Engine Position | Front | Front |
| Engine Size | 2195 cc | 2700 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 118 HP | 179 HP |
| Engine RPM | 4800 RPM | 5800 RPM |
| Torque | 189 Nm | 247 Nm |
| Torque RPM | 3900 RPM | 4200 RPM |
| Engine Bore Size | 80.1 mm | 90 mm |
| Engine Stroke Size | 72.8 mm | 105 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 5 doors | 5 doors |
| Vehicle Weight | 1375 kg | 1705 kg |
| Vehicle Length | 4880 mm | 4800 mm |
| Vehicle Width | 1800 mm | 1905 mm |
| Vehicle Height | 1450 mm | 1610 mm |
| Wheelbase Size | 2760 mm | 2775 mm |
| Fuel Tank Capacity | 52 L | 67 L |
