1962 NSU Prinz vs. 2013 Cadillac SRX

To start off, 2013 Cadillac SRX is newer by 51 year(s). Which means there will be less support and parts availability for 1962 NSU Prinz. In addition, the cost of maintenance, including insurance, on 1962 NSU Prinz would be higher. At 3,600 cc (6 cylinders), 2013 Cadillac SRX is equipped with a bigger engine. In terms of performance, 2013 Cadillac SRX (304 HP @ 6800 RPM) has 274 more horse power than 1962 NSU Prinz. (30 HP @ 5500 RPM) In normal driving conditions, 2013 Cadillac SRX should accelerate faster than 1962 NSU Prinz. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac SRX weights approximately 1915 kg more than 1962 NSU Prinz. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 NSU Prinz is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 NSU Prinz. However, in wet, icy, snow, or gravel driving conditions, 2013 Cadillac SRX, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac SRX (359 Nm @ 2400 RPM) has 317 more torque (in Nm) than 1962 NSU Prinz. (42 Nm @ 3200 RPM). This means 2013 Cadillac SRX will have an easier job in driving up hills or pulling heavy equipment than 1962 NSU Prinz. 2013 Cadillac SRX has automatic transmission and 1962 NSU Prinz has manual transmission. 1962 NSU Prinz will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac SRX will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 NSU Prinz 2013 Cadillac SRX
Make NSU Cadillac
Model Prinz SRX
Year Released 1962 2013
Engine Position Rear Front
Engine Size 581 cc 3600 cc
Engine Cylinders 2 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 30 HP 304 HP
Engine RPM 5500 RPM 6800 RPM
Torque 42 Nm 359 Nm
Torque RPM 3200 RPM 2400 RPM
Engine Bore Size 76 mm 94 mm
Engine Stroke Size 66 mm 86 mm
Engine Compression Ratio 7.5:1 11.5
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 565 kg 2480 kg
Vehicle Length 3570 mm 4834 mm
Vehicle Width 1530 mm 1910 mm
Vehicle Height 1240 mm 1669 mm
Wheelbase Size 2010 mm 2807 mm
Fuel Tank Capacity 37 L 80 L