1963 Abarth 595 vs. 2008 BMW 525

To start off, 2008 BMW 525 is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Abarth 595. In addition, the cost of maintenance, including insurance, on 1963 Abarth 595 would be higher. At 2,494 cc, 2008 BMW 525 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 525 weights approximately 1210 kg more than 1963 Abarth 595.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 525 (245 Nm @ 3500 RPM) has 200 more torque (in Nm) than 1963 Abarth 595. (45 Nm @ 3500 RPM). This means 2008 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1963 Abarth 595. 2008 BMW 525 has automatic transmission and 1963 Abarth 595 has manual transmission. 1963 Abarth 595 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 525 will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Abarth 595 2008 BMW 525
Make Abarth BMW
Model 595 525
Year Released 1963 2008
Engine Position Rear Front
Engine Size 594 cc 2494 cc
Horse Power 27 HP 0 HP
Torque 45 Nm 245 Nm
Torque RPM 3500 RPM 3500 RPM
Engine Bore Size 73 mm 84.1 mm
Engine Stroke Size 70 mm 75 mm
Engine Compression Ratio 9.2:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 470 kg 1680 kg
Vehicle Length 2980 mm 4870 mm
Vehicle Width 1330 mm 1850 mm
Vehicle Height 1330 mm 1500 mm
Wheelbase Size 1850 mm 2840 mm
Fuel Tank Capacity 30 L 70 L