1963 Abarth 700 vs. 2010 Hyundai Elantra

To start off, 2010 Hyundai Elantra is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Abarth 700. In addition, the cost of maintenance, including insurance, on 1963 Abarth 700 would be higher. At 2,000 cc (4 cylinders), 2010 Hyundai Elantra is equipped with a bigger engine. In terms of performance, 2010 Hyundai Elantra (132 HP @ 6000 RPM) has 69 more horse power than 1963 Abarth 700. (63 HP @ 7600 RPM) In normal driving conditions, 2010 Hyundai Elantra should accelerate faster than 1963 Abarth 700. With that said, vehicle weight also plays an important factor in acceleration. 2010 Hyundai Elantra weights approximately 676 kg more than 1963 Abarth 700. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Abarth 700 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Abarth 700. However, in wet, icy, snow, or gravel driving conditions, 2010 Hyundai Elantra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Hyundai Elantra (180 Nm @ 4600 RPM) has 111 more torque (in Nm) than 1963 Abarth 700. (69 Nm @ 5800 RPM). This means 2010 Hyundai Elantra will have an easier job in driving up hills or pulling heavy equipment than 1963 Abarth 700. 2010 Hyundai Elantra has automatic transmission and 1963 Abarth 700 has manual transmission. 1963 Abarth 700 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Hyundai Elantra will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Abarth 700 2010 Hyundai Elantra
Make Abarth Hyundai
Model 700 Elantra
Year Released 1963 2010
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 695 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 63 HP 132 HP
Engine RPM 7600 RPM 6000 RPM
Torque 69 Nm 180 Nm
Torque RPM 5800 RPM 4600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 570 kg 1246 kg
Vehicle Length 3480 mm 4506 mm
Vehicle Width 1360 mm 1775 mm
Vehicle Height 1110 mm 1481 mm
Wheelbase Size 2010 mm 2649 mm
Fuel Tank Capacity 55 L 53 L