1963 Abarth 750 vs. 2008 Toyota Stallion
To start off, 2008 Toyota Stallion is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Abarth 750. In addition, the cost of maintenance, including insurance, on 1963 Abarth 750 would be higher. At 1,812 cc, 2008 Toyota Stallion is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Stallion weights approximately 783 kg more than 1963 Abarth 750.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Toyota Stallion (135 Nm @ 2400 RPM) has 78 more torque (in Nm) than 1963 Abarth 750. (57 Nm @ 4500 RPM). This means 2008 Toyota Stallion will have an easier job in driving up hills or pulling heavy equipment than 1963 Abarth 750.
Compare all specifications:
1963 Abarth 750 | 2008 Toyota Stallion | |
Make | Abarth | Toyota |
Model | 750 | Stallion |
Year Released | 1963 | 2008 |
Engine Position | Rear | Front |
Engine Size | 747 cc | 1812 cc |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 43 HP | 0 HP |
Torque | 57 Nm | 135 Nm |
Torque RPM | 4500 RPM | 2400 RPM |
Engine Bore Size | 61 mm | 86 mm |
Engine Stroke Size | 64 mm | 78 mm |
Engine Compression Ratio | 9.0:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 3 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 535 kg | 1318 kg |
Vehicle Length | 3300 mm | 4790 mm |
Vehicle Height | 1410 mm | 1770 mm |
Wheelbase Size | 2010 mm | 2660 mm |
Fuel Tank Capacity | 27 L | 70 L |