1963 Abarth Mono 1000 vs. 1976 Fiat 130
To start off, 1976 Fiat 130 is newer by 13 year(s). Which means there will be less support and parts availability for 1963 Abarth Mono 1000. In addition, the cost of maintenance, including insurance, on 1963 Abarth Mono 1000 would be higher. At 3,238 cc (6 cylinders), 1976 Fiat 130 is equipped with a bigger engine. In terms of performance, 1976 Fiat 130 (163 HP @ 5600 RPM) has 104 more horse power than 1963 Abarth Mono 1000. (59 HP @ 6600 RPM) In normal driving conditions, 1976 Fiat 130 should accelerate faster than 1963 Abarth Mono 1000. With that said, vehicle weight also plays an important factor in acceleration. 1976 Fiat 130 weights approximately 1042 kg more than 1963 Abarth Mono 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1976 Fiat 130 (255 Nm @ 3400 RPM) has 165 more torque (in Nm) than 1963 Abarth Mono 1000. (90 Nm @ 3200 RPM). This means 1976 Fiat 130 will have an easier job in driving up hills or pulling heavy equipment than 1963 Abarth Mono 1000.
Compare all specifications:
1963 Abarth Mono 1000 | 1976 Fiat 130 | |
Make | Abarth | Fiat |
Model | Mono 1000 | 130 |
Year Released | 1963 | 1976 |
Engine Position | Rear | Front |
Engine Size | 981 cc | 3238 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 163 HP |
Engine RPM | 6600 RPM | 5600 RPM |
Torque | 90 Nm | 255 Nm |
Torque RPM | 3200 RPM | 3400 RPM |
Engine Bore Size | 65 mm | 102 mm |
Engine Stroke Size | 74 mm | 66 mm |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 560 kg | 1602 kg |
Vehicle Length | 3490 mm | 4850 mm |
Vehicle Width | 1420 mm | 1770 mm |
Vehicle Height | 1180 mm | 1380 mm |
Wheelbase Size | 2010 mm | 2730 mm |
Fuel Tank Capacity | 59 L | 50 L |