1963 Abarth Mono 1000 vs. 1993 Rover 200
To start off, 1993 Rover 200 is newer by 30 year(s). Which means there will be less support and parts availability for 1963 Abarth Mono 1000. In addition, the cost of maintenance, including insurance, on 1963 Abarth Mono 1000 would be higher. At 1,993 cc (4 cylinders), 1993 Rover 200 is equipped with a bigger engine. In terms of performance, 1993 Rover 200 (197 HP @ 6000 RPM) has 138 more horse power than 1963 Abarth Mono 1000. (59 HP @ 6600 RPM) In normal driving conditions, 1993 Rover 200 should accelerate faster than 1963 Abarth Mono 1000. With that said, vehicle weight also plays an important factor in acceleration. 1993 Rover 200 weights approximately 625 kg more than 1963 Abarth Mono 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1993 Rover 200 (237 Nm @ 2100 RPM) has 147 more torque (in Nm) than 1963 Abarth Mono 1000. (90 Nm @ 3200 RPM). This means 1993 Rover 200 will have an easier job in driving up hills or pulling heavy equipment than 1963 Abarth Mono 1000.
Compare all specifications:
1963 Abarth Mono 1000 | 1993 Rover 200 | |
Make | Abarth | Rover |
Model | Mono 1000 | 200 |
Year Released | 1963 | 1993 |
Engine Position | Rear | Front |
Engine Size | 981 cc | 1993 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 59 HP | 197 HP |
Engine RPM | 6600 RPM | 6000 RPM |
Torque | 90 Nm | 237 Nm |
Torque RPM | 3200 RPM | 2100 RPM |
Engine Bore Size | 65 mm | 84.5 mm |
Engine Stroke Size | 74 mm | 89 mm |
Engine Compression Ratio | 9.8:1 | 8.5:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 2 seats | 4 seats |
Vehicle Weight | 560 kg | 1185 kg |
Vehicle Length | 3490 mm | 4230 mm |
Vehicle Width | 1420 mm | 1690 mm |
Vehicle Height | 1180 mm | 1410 mm |