1963 Alfa Romeo 2600 vs. 1983 Pontiac Phoenix
To start off, 1983 Pontiac Phoenix is newer by 20 year(s). Which means there will be less support and parts availability for 1963 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1963 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1963 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1963 Alfa Romeo 2600 (164 HP @ 5900 RPM) has 74 more horse power than 1983 Pontiac Phoenix. (90 HP @ 4000 RPM). In normal driving conditions, 1963 Alfa Romeo 2600 should accelerate faster than 1983 Pontiac Phoenix. With that said, vehicle weight also plays an important factor in acceleration. 1963 Alfa Romeo 2600 weights approximately 15 kg more than 1983 Pontiac Phoenix. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 1983 Pontiac Phoenix, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1963 Alfa Romeo 2600 (220 Nm @ 4000 RPM) has 39 more torque (in Nm) than 1983 Pontiac Phoenix. (181 Nm @ 2400 RPM). This means 1963 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 1983 Pontiac Phoenix. 1983 Pontiac Phoenix has automatic transmission and 1963 Alfa Romeo 2600 has manual transmission. 1963 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Pontiac Phoenix will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Alfa Romeo 2600 | 1983 Pontiac Phoenix | |
Make | Alfa Romeo | Pontiac |
Model | 2600 | Phoenix |
Year Released | 1963 | 1983 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 2474 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 164 HP | 90 HP |
Engine RPM | 5900 RPM | 4000 RPM |
Torque | 220 Nm | 181 Nm |
Torque RPM | 4000 RPM | 2400 RPM |
Engine Bore Size | 83 mm | 101.7 mm |
Engine Stroke Size | 79.6 mm | 76.2 mm |
Engine Compression Ratio | 8.5:1 | 8.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1115 kg | 1100 kg |
Vehicle Length | 4410 mm | 4660 mm |
Vehicle Width | 1660 mm | 1760 mm |
Vehicle Height | 1330 mm | 1360 mm |
Wheelbase Size | 2510 mm | 2670 mm |