1963 Alfa Romeo 2600 vs. 1991 Buick LeSabre
To start off, 1991 Buick LeSabre is newer by 28 year(s). Which means there will be less support and parts availability for 1963 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1963 Alfa Romeo 2600 would be higher. At 3,791 cc (6 cylinders), 1991 Buick LeSabre is equipped with a bigger engine. In terms of performance, 1991 Buick LeSabre (168 HP @ 4800 RPM) has 4 more horse power than 1963 Alfa Romeo 2600. (164 HP @ 5900 RPM) In normal driving conditions, 1991 Buick LeSabre should accelerate faster than 1963 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 1991 Buick LeSabre weights approximately 435 kg more than 1963 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 1991 Buick LeSabre, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Buick LeSabre (299 Nm @ 3200 RPM) has 79 more torque (in Nm) than 1963 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 1991 Buick LeSabre will have an easier job in driving up hills or pulling heavy equipment than 1963 Alfa Romeo 2600. 1991 Buick LeSabre has automatic transmission and 1963 Alfa Romeo 2600 has manual transmission. 1963 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1991 Buick LeSabre will be easier to drive especially in heavy traffic.
Compare all specifications:
1963 Alfa Romeo 2600 | 1991 Buick LeSabre | |
Make | Alfa Romeo | Buick |
Model | 2600 | LeSabre |
Year Released | 1963 | 1991 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 3791 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 164 HP | 168 HP |
Engine RPM | 5900 RPM | 4800 RPM |
Torque | 220 Nm | 299 Nm |
Torque RPM | 4000 RPM | 3200 RPM |
Engine Bore Size | 83 mm | 96.5 mm |
Engine Stroke Size | 79.6 mm | 86.4 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1115 kg | 1550 kg |
Vehicle Length | 4410 mm | 5090 mm |
Vehicle Width | 1660 mm | 1910 mm |
Vehicle Height | 1330 mm | 1420 mm |
Wheelbase Size | 2510 mm | 2820 mm |
Fuel Tank Capacity | 47 L | 62 L |