1963 Austin A 90 vs. 2010 Mercedes-Benz ML

To start off, 2010 Mercedes-Benz ML is newer by 47 year(s). Which means there will be less support and parts availability for 1963 Austin A 90. In addition, the cost of maintenance, including insurance, on 1963 Austin A 90 would be higher. At 3,500 cc (6 cylinders), 2010 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz ML (268 HP @ 6000 RPM) has 148 more horse power than 1963 Austin A 90. (120 HP @ 4750 RPM) In normal driving conditions, 2010 Mercedes-Benz ML should accelerate faster than 1963 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz ML weights approximately 531 kg more than 1963 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Mercedes-Benz ML is four wheel drive (4WD), it will have significant more traction and grip than 1963 Austin A 90. In wet, icy, snow, or gravel driving conditions, 2010 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz ML (349 Nm @ 2400 RPM) has 128 more torque (in Nm) than 1963 Austin A 90. (221 Nm @ 2750 RPM). This means 2010 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1963 Austin A 90. 2010 Mercedes-Benz ML has automatic transmission and 1963 Austin A 90 has manual transmission. 1963 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz ML will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Austin A 90 2010 Mercedes-Benz ML
Make Austin Mercedes-Benz
Model A 90 ML
Year Released 1963 2010
Engine Position Front Front
Engine Size 2912 cc 3500 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 120 HP 268 HP
Engine RPM 4750 RPM 6000 RPM
Torque 221 Nm 349 Nm
Torque RPM 2750 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1570 kg 2101 kg
Vehicle Length 4780 mm 4780 mm
Vehicle Width 1750 mm 1910 mm
Vehicle Height 1540 mm 1816 mm
Wheelbase Size 2750 mm 2913 mm
Fuel Tank Capacity 34 L 95 L