1963 Austin-Healey 3000 Mk III vs. 1975 Chrysler Sedan

To start off, 1975 Chrysler Sedan is newer by 12 year(s). Which means there will be less support and parts availability for 1963 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1963 Austin-Healey 3000 Mk III would be higher. At 4,342 cc (6 cylinders), 1975 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1975 Chrysler Sedan (200 HP @ 4800 RPM) has 54 more horse power than 1963 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 1975 Chrysler Sedan should accelerate faster than 1963 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 1975 Chrysler Sedan weights approximately 340 kg more than 1963 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Chrysler Sedan (355 Nm @ 2000 RPM) has 190 more torque (in Nm) than 1963 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 1975 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1963 Austin-Healey 3000 Mk III. 1975 Chrysler Sedan has automatic transmission and 1963 Austin-Healey 3000 Mk III has manual transmission. 1963 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1963 Austin-Healey 3000 Mk III 1975 Chrysler Sedan
Make Austin-Healey Chrysler
Model 3000 Mk III Sedan
Year Released 1963 1975
Engine Position Front Front
Engine Size 2912 cc 4342 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 146 HP 200 HP
Engine RPM 5250 RPM 4800 RPM
Torque 165 Nm 355 Nm
Torque RPM 3500 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Doors 2 doors 4 doors
Vehicle Weight 1180 kg 1520 kg
Vehicle Length 4010 mm 5010 mm
Vehicle Width 1540 mm 1890 mm
Vehicle Height 1250 mm 1440 mm
Wheelbase Size 2340 mm 2930 mm